angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 55 mm x 80 mm x 13 mm KOYO HAR911C angular contact ball bearings
- 287.337 mm
- 189 kN
- 80 mm x 110 mm x 16 mm FAG HS71916-C-T-P4S angular contact ball bearings
- 45500 N
- 85.000 mm
- 130 mm x 180 mm x 24 mm FAG HCS71926-E-T-P4S angular contact ball bearings
- 2600 rpm
- 215.0000 mm
- Toyana 7016C angular contact ball bearings
- 119.812 mm
- 56 kN
- ILJIN IJ113042 angular contact ball bearings
- 289.999 mm
- 28.575 mm