angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 80 mm x 125 mm x 22 mm CYSD 7016C angular contact ball bearings
- 52.0000 mm
- 25.000 mm
- Toyana 7201 B-UD angular contact ball bearings
- 530 mm
- 68 mm
- 150 mm x 320 mm x 65 mm NSK 7330 B angular contact ball bearings
- 11 mm
- 7 500 min-1
- 35 mm x 62 mm x 20 mm FAG 3007-B-2Z-TVH angular contact ball bearings
- 10800 N
- 11000 rpm
- 42 mm x 80 mm x 36 mm PFI PW42800036/34CS angular contact ball bearings
- 6000 rpm
- 22.00 mm
- Toyana 3309 ZZ angular contact ball bearings
- 325000 N
- 133000 N
- 180,000 mm x 250,000 mm x 66,000 mm NTN SF3635DB angular contact ball bearings
- 70200 N
- One Shield & Snap-Ri
- 60 mm x 110 mm x 22 mm NSK 7212BEA angular contact ball bearings
- M 20x40
- 0.26 kg