thrust ball bearings
Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.
- Toyana 51228 thrust ball bearings
- Outer Race with Two
- 269.82 kN
- SKF 51416 M thrust ball bearings
- SAE 841, CT-1000-K26
- Oil-Impregnated Bron
- 75 mm x 160 mm x 37 mm SKF NUP 315 ECP thrust ball bearings
- 55mm
- Open Type
- Toyana 53252U+U252 thrust ball bearings
- 019240
- Center Pull
- 75 mm x 160 mm x 37 mm SKF NJ 315 ECJ thrust ball bearings
- 1 mm
- ABEC 7 (ISO Cla
- 30 mm x 100 mm x 38 mm INA ZKLF30100-2RS thrust ball bearings
- Uncoated
- Non-Expansion Bearin
- AST 51312 thrust ball bearings
- 029176012945
- C3
- ISB ZB1.20.0544.200-1SPTN thrust ball bearings
- 5.1875 in
- Standard Precision
- ISO 54204U+U204 thrust ball bearings
- ±0.001 in
- +0.005/-0.