angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 100 mm x 150 mm x 24 mm SNFA VEX 100 /S 7CE1 angular contact ball bearings
- 470 mm
- 2 x FRB 29.5/720
- 140 mm x 300 mm x 62 mm NTN 7328DT angular contact ball bearings
- 97500 N
- 1.00 mm
- Toyana 7206 A-UX angular contact ball bearings
- 3.8125 in
- 0.5313 in
- 50 mm x 80 mm x 16 mm NACHI 7010CDB angular contact ball bearings
- 13000 N
- 7000 rpm
- Toyana 7230 B-UX angular contact ball bearings
- 5 kN
- 41.5 kN
- 17 mm x 47 mm x 22,2 mm SKF 3303A-2RS1 angular contact ball bearings
- 1.00 mm
- 3400 rpm
- 25 mm x 52 mm x 15 mm NTN BNT205 angular contact ball bearings
- 9.0 mm
- 88000 Two Seals
- ISO 3307 angular contact ball bearings
- mm
- 9 400 min-1