thrust ball bearings
Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.
- FAG 53204 + U204 thrust ball bearings
- 5220 lbf
- 8.1250 in
- RHP MT7 thrust ball bearings
- Without Snap Ring
- 1.6250 in
- 460 mm x 830 mm x 212 mm SKF NU 2292 MA thrust ball bearings
- Non-Expansion Bearin
- 1-9/16 in
- SKF 51116 thrust ball bearings
- 2530000 lbs
- 1,200,000
- KOYO 52308 thrust ball bearings
- 2.4375 in
- 2.5625 in
- 65 mm x 115 mm x 10 mm NKE 54216-MP thrust ball bearings
- 1-5/16 in
- -40 to +700 &de
- FAG 53317 thrust ball bearings
- 5600 RPM
- Double-Row Non-Fill
- NTN 81128 thrust ball bearings
- 22 mm
- 0.089 kg
- AST 51316 thrust ball bearings
- -30 to +300 &de
- 5 °
- 140 mm x 250 mm x 42 mm SKF NJ 228 ECJ thrust ball bearings
- -30 to +100 &de
- 60 mm