thrust ball bearings
Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features:Available in two designs: single direction and double direction.To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.High quality steel-ultra clean steel to extend bearing life by up to 80%.Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.
- 40 mm x 72 mm x 42 mm INA DKLFA40115-2RS thrust ball bearings
- 4.13 in
- Adapter Mount
- 35 mm x 90 mm x 34 mm INA ZKLF3590-2RS thrust ball bearings
- 2.3750 in
- Round
- ISO 234414 thrust ball bearings
- Single Set Screw
- Cast Iron
- 400 mm x 600 mm x 90 mm SKF NU 1080 N2MA thrust ball bearings
- 1-1/2 in
- Flanged Bearing
- KOYO 53414U thrust ball bearings
- 053893946702
- 10.0000 in
- 25 mm x 52 mm x 15 mm FAG 7602025-TVP thrust ball bearings
- Tapered Roller
- Adapter Mount
- NTN 511/630 thrust ball bearings
- 1-3/4 in
- G1100KRRB
- RHP LT7 thrust ball bearings
- 750 RPM
- 109000 lbf
- Toyana 53407 thrust ball bearings
- Uncoated
- LM545810, LM545812
- KOYO 53416U thrust ball bearings
- 11.2 kN
- 12000 r/min
- ISO 52428 thrust ball bearings
- C0
- 41 mm