cylindrical roller bearings
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings. As such, the rollers have a greater (linear) contact area with the outer ring and are distribute loads across a broader surface. Subsequently, they have a relatively high radial load capacity and are suitable for high speeds. Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.
Depending on the series as defined below a number of cylindrical roller bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other which can be used as free-end bearings.
Pressed steel (with or without tins or fins) or machined brass cages are generally used, but sometimes molded polyamide cages are also available depending on the application. Cylindrical Roller Bearings are also available without cages with a full complement of rollers. This allows even higher loads but at the expense of speed.
- 75 mm x 160 mm x 37 mm 75 mm x 160 mm x 37 mm NKE NU315-E-MPA cylindrical roller bearings
- NS Hairyu-bu Grease
- Steel
- 80 mm x 140 mm x 33 mm 80 mm x 140 mm x 33 mm NKE NJ2216-E-MPA+HJ2216-E cylindrical roller bearings
- Deep Groove Ball Bea
- Double
- 190 mm x 290 mm x 100 mm 190 mm x 290 mm x 100 mm SKF C 4038 K30V cylindrical roller bearings
- Bearings with Housin
- Yes (with retaining
- 30 mm x 72 mm x 19 mm 30 mm x 72 mm x 19 mm NACHI NUP 306 cylindrical roller bearings
- 6
- Electroless Nickel P
- 30 mm x 55 mm x 34 mm 30 mm x 55 mm x 34 mm ZEN NCF5006-2LSV cylindrical roller bearings
- Deep Groove Ball Bea
- 6
- Toyana NAO6x17x10 cylindrical roller bearings
- J7
- Insert Bearing Unit