DEARING OF AMERICA CORP.

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

ISO 7413 BDF angular contact ball bearings
1.00 mm
221000 N
420 mm x 760 mm x 109 mm NSK 7284A angular contact ball bearings
380.0000 mm
689000 N
ISO 7064 ADT angular contact ball bearings
HN 15
M 75x2
140 mm x 250 mm x 42 mm SKF 7228 ACD/HCP4A angular contact ball bearings
0.08
7 kg
70 mm x 110 mm x 20 mm SKF 7014 ACE/P4A angular contact ball bearings
40 mm
10 N/mm²
ISO 7016 ADT angular contact ball bearings
1200 r/min
240 mm
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
angular contact ball bearings
bearing units
cylindrical roller bearings
deep groove ball bearings
needle roller bearings
plain bearings
self aligning ball bearings
spherical roller bearings
tapered roller bearings
thrust ball bearings
thrust roller bearings
wheel bearings
Fag 22320 Bearing
Koyo 6205 2rs Bearing
Koyo 6205rs Bearing
607 YSX Koyo Bearing