angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- Timken 5305KG angular contact ball bearings
- 28000 rpm
- 15000 rpm
- Toyana 7056 A-UO angular contact ball bearings
- 20 mm
- 12 mm
- 55 mm x 100 mm x 33,3 mm SIGMA 3211 angular contact ball bearings
- 304.8 mm
- 831.85 mm
- 15 mm x 35 mm x 11 mm NACHI 7202DF angular contact ball bearings
- 30300 N
- One Seal & Snap-Ring
- Toyana QJ1016 angular contact ball bearings
- 32 mm
- M 12x25
- 30 mm x 47 mm x 9 mm NTN 7906DT angular contact ball bearings
- 0.794 mm
- 15.875 mm
- 10 mm x 22 mm x 6 mm SNFA VEB 10 7CE1 angular contact ball bearings
- 890 min-1
- 670 min-1
- 175 mm x 235 mm x 30 mm KOYO AC3524B angular contact ball bearings
- FY 509 M
- 24.5 mm