angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle. Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 380 mm x 520 mm x 65 mm NSK 7976A angular contact ball bearings
- 5.0000 in
- 1.6875 in
- 120 mm x 180 mm x 28 mm SKF 7024 CE/P4AH1 angular contact ball bearings
- 61.913 mm
- SNW 38x7
- 15 mm x 32 mm x 9 mm CYSD 7002CDB angular contact ball bearings
- 10000 rpm
- Two Shields
- 20 mm x 32 mm x 10 mm ZEN 3804-2RS angular contact ball bearings
- 590 r/min
- 136 kN
- 20 mm x 52 mm x 15 mm SKF QJ 304 MA angular contact ball bearings
- 19900 N
- 40.0000 mm
- 30 mm x 62 mm x 16 mm CYSD 7206 angular contact ball bearings
- 160 mm
- 76.400 kN
- 55 mm x 120 mm x 29 mm CYSD 7311DF angular contact ball bearings
- 2.00 mm
- Snap-Ring